Aluminium Sacrificial Anodes

ALUMINIUM TEARDROP ANODES

Applications: Commercial vessels, pleasure vessels, buoys, pylons and sea chests.

ANODE SHAPEPRODUCT
CODE
ANODE
LENGTH
(MM)
ANODE
WIDTH
(MM)
ANODE
HEIGHT
(MM)
NOMINAL
NETT
WEIGHT
(KG)
NOMINAL
GROSS
WEIGHT
(KG)
INSERT
DIMENSIONS
(MM)
AW8C1AW8C116080400.500.70260x25x3 MS
AW8C2AW8C221075400.801.00310x25x3 MS



ALUMINIUM
CRAYPOT ANODE

Applications: Lobster, crayfish and crab pots.

ANODE SHAPEPRODUCT
CODE
ANODE
LENGTH
(MM)
ANODE
WIDTH
(MM)
ANODE
HEIGHT
(MM)
NOMINAL
NETT
WEIGHT
(KG)
NOMINAL
GROSS
WEIGHT
(KG)
INSERT
DIMENSIONS
(MM)
AW7C2AW7C217525300.360.40400x2.5mm or 4mm diameter wire


 

ALUMINIUM NAVY TYPE ANODES

Applications: Navy Vessels.

ANODE SHAPEPRODUCT
CODE
ANODE
LENGTH
(MM)
ANODE
WIDTH
(MM)
ANODE
HEIGHT
(MM)
DISTANCE BETWEEN HOLE CENTRES (MM)NOMINAL
NETT
WEIGHT
(KG)
NOMINAL
GROSS
WEIGHT
(KG)
INSERT
DIMENSIONS
(MM)
Type 4A Imperial22"5 1/8"2"10"6.77.4400x40x6 MS
Type 4B Imperial20"5 1/8"2"10"6.57.2400x40x6 MS
Type 4A Metric550130502506.77.4400x40x6 MS
Type 4B Metric550130502506.57.2400x40x6 MS

 


SMALL ALUMINIUM BLOCK ANODES

Applications: Small marine craft, ballast tanks, sea chests, buoys, pylons, wharves, power stations.

ANODE SHAPEPRODUCT
CODE
ANODE
LENGTH
(MM)
ANODE
WIDTH
(MM)
ANODE
HEIGHT
(MM)
DISTANCE BETWEEN HOLE CENTRES (MM)NOMINAL
NETT
WEIGHT
(KG)
NOMINAL
GROSS
WEIGHT
(KG)
INSERT
DIMENSIONS
(MM)
AW6CAW6C1507035-0.701.00250x25x3 MS
AW9B4AW9B4315130301501.502.10260x40x6 MS Also avail. with rubber gasket
.AW9CAW9C130015030-2.803.70440x40x6 MS
AW9C230015050-4.004.90440x40x6 MS
AW9C335015035-3.604.60500x40x6 MS
AW11AAW11A115015025--1.40NO INSERT
AW16CAW16C22858040-1.652.20435x25x6 MS
AW18CAW17C150012540-6.708.10700x40x6 MS
AW17C250012550-7.408.90700x40x6 MS
AW18C158013540-7.509.00780x40x6 MS
AW18C359014050-9.6011.10790x40x6 MS
AW18C561014065-13.1014.60790x40x6 MS
AW18C1558513536-7.709.20785x40x6 MS
AW25BAW25B300100501602.503.0200x40x6 MS Also avail. with rubber gasket




LARGE BLOCK ANODES

Applications: Large scale industry, infrastructure, tanker, wharf or other marine protection. Aluminium Anodes Ready to be Installed

AMAC have hundreds of large block anode moulds capable of producing a wide range of sizes. Our current moulds are able to produce anodes of the following dimensions:

Length = 3000mm maximum
Width = 330mm maximum
Height = 330mm maximum

For anode sizes outside of these dimensions, new moulds can be made.

 

 


ANODE INSERT SELECTION

AMAC Cast onto a variety of insert types, depending on the method of attachment required.

This illustration on the right identified the most common insert types.

All steel is inspected prior to casting. If required, abrasive
cleaning is conducted according to Australian or International standards.


The following table represents a small proportion of the large block anodes we are able to manufacture.

ANODE SHAPEPRODUCT
CODE
ANODE
LENGTH
(MM)
ANODE
WIDTH
(MM)
ANODE
HEIGHT
(MM)
NOMINAL
NETT
WEIGHT
(KG)*
NOMINAL
GROSS
WEIGHT
(KG)*
AW12C
AW12C 250x180x190
25018019024.028.5
AW12C 330x125x110
33012511012.713.7
AW12C 700x165x160
70016516044.049.3
AW12C 760x160x145
76016014547.950.5
AW12C 1000x50x50
100050506.58.5
AW12C 1000x100x100
100010010027.931.3
AW12C 1200x65x65
1200656514.015.2
AW12C 1200x100x100
120010010033.835.0
AW12C 1200x165x160
120016516081.086.0
AW12C 1220x75x75
1220757519.220.4
AW12C 1500x50x50
1500505010.311.0
AW12C 1500x65x65

1500

65

65

17.3

18.8

AW12C 1500x75x75
1500757523.024.9
AW12C 1500x95x130
15009513048.753.7
AW12C 1500x100x100
150010010042.045.1
AW12C 1500x165x160
1500165160100.0108.5
AW12C 1500x280x260
1500280260310.0324.0
AW12C 1800x175x220
1800175220195.0207.0
AW12C 2400x165x160
2400165160154.0181.3
AW12C 2400x170x215
2400170215200.0225.0
* Anode Weights may vary according to insert type



ALUMINIUM BRACELET ANODES

Aluminium Bracelet Anodes Applications: Marine and Subterranean pipelines and pylons.

Manufacturing bracelet anodes for over 25 years allows us to meet almost any design requirements. The bracelet anodes below are the most common. Any combination of these elements, as well as anode length, thickness and weight can be incorporated to meet particular project requirements. If a project requires a uniquely designed bracelet anode, please contact our office.



AMAC has a strict set of quality control mechanisms designed to ensure that each anode will function at its optimum for its entire design life. These controls ensure that steel grades and welding processes meet Australian and International Standards, alloy composition is accurate, insert fabrication meets dimensional specification, coating of internal surfaces and steel work is correct and all anodes meet weight and dimensional requirements.

ANODE SHAPE
SECTION A-A
ANODE SHAPE
SIDE VIEW
ANODE DESCRIPTION
Aluminium Bracelet AnodeAluminium Bracelet Anode

FOUR SEGMENT BRACELET ANODE
- External pipe clamp
- Mild steel flat bar inserts with rod supports
- Anode half bracelet pipe clamp tabs welded at site

Aluminium Bracelet AnodeAluminium Bracelet AnodeTWO SEGMENT BRACELET ANODE
- Internal pipe clamp
- Mild steel flat bar inserts with rod supports
- Anode half bracelet pipe clamp tabs welded at site
Aluminium Bracelet AnodeAluminium Bracelet AnodeTWO SEGMENT TAPERED BRACELET ANODE
- Internal pipe clamp
- Mild steel flat bar inserts with rod supports
- Anode half bracelet pipe clamp, bolted together at site. Bolts designed so that half bracelets hinge around the pipe.
Aluminium Bracelet AnodeAluminium Bracelet AnodeFOUR SEGMENT BLOCK ANODES ATTACHED TO 
BRACELET
- Four standard block anodes, welded to external clamp
- Mild steel flat bar inserts and clamp
- Anode half bracelet pipe clamp tabs bolted at site
Aluminium Bracelet AnodeAluminium Bracelet AnodeAluminium Bracelet AnodeTWO SEGMENT BRACELET ANODE
- External pipe clamp
- Mild steel flat bar inserts with rod supports
- Anode half bracelet pipe clamp tabs bolted at site

 

 

SPECIAL PURPOSE ANODES

AMAC has been manufacturing sacrificial anodes for over 25 years, over that time we have produced thousands of unique anodes for special purpose applications. We have the facilities to create any shape or size.

aluminium-cone-anodes Aluminium-Vortoil-Anode aluminium-curved-anodes