(03) 9729 8888

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	INSERT DIMENSIONS (MM)
	AW8C1	160	80	40	0.50	0.70	260x25x3 MS
	AW8C2	210	75	40	0.80	1.00	310x25x3 MS

ALUMINIUM CRAYPOT ANODE

Applications: Lobster, crayfish and crab pots.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	INSERT DIMENSIONS (MM)
	AW7C2	175	25	30	0.36	0.40	400x2.5mm or 4mm diameter wire

ALUMINIUM NAVY TYPE ANODES

Applications: Navy Vessels.

ANODE SHAPE PRODUCT
CODE ANODE
LENGTH
(MM) ANODE
WIDTH
(MM) ANODE
HEIGHT
(MM) DISTANCE BETWEEN HOLE CENTRES (MM) NOMINAL
NETT
WEIGHT
(KG) NOMINAL
GROSS
WEIGHT
(KG) INSERT
DIMENSIONS
(MM)
Type 4A Imperial 22" 5 1/8" 2" 10" 6.7 7.4 400x40x6 MS
Type 4B Imperial 20" 5 1/8" 2" 10" 6.5 7.2 400x40x6 MS
Type 4A Metric 550 130 50 250 6.7 7.4 400x40x6 MS
Type 4B Metric 550 130 50 250 6.5 7.2 400x40x6 MS

SMALL ALUMINIUM BLOCK ANODES

Applications: Small marine craft, ballast tanks, sea chests, buoys, pylons, wharves, power stations.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	DISTANCE BETWEEN HOLE CENTRES (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	INSERT DIMENSIONS (MM)
	AW6C	150	70	35	-	0.70	1.00	250x25x3 MS
	AW9B4	315	130	30	150	1.50	2.10	260x40x6 MS Also avail. with rubber gasket
.	AW9C1	300	150	30	-	2.80	3.70	440x40x6 MS
	AW9C2	300	150	50	-	4.00	4.90	440x40x6 MS
	AW9C3	350	150	35	-	3.60	4.60	500x40x6 MS
	AW11A1	150	150	25	-	-	1.40	NO INSERT
	AW16C2	285	80	40	-	1.65	2.20	435x25x6 MS
	AW17C1	500	125	40	-	6.70	8.10	700x40x6 MS
	AW17C2	500	125	50	-	7.40	8.90	700x40x6 MS
	AW18C1	580	135	40	-	7.50	9.00	780x40x6 MS
	AW18C3	590	140	50	-	9.60	11.10	790x40x6 MS
	AW18C5	610	140	65	-	13.10	14.60	790x40x6 MS
	AW18C15	585	135	36	-	7.70	9.20	785x40x6 MS
	AW25B	300	100	50	160	2.50	3.0	200x40x6 MS Also avail. with rubber gasket

LARGE BLOCK ANODES

Applications: Large scale industry, infrastructure, tanker, wharf or other marine protection. Aluminium Anodes Ready to be Installed

AMAC have hundreds of large block anode moulds capable of producing a wide range of sizes. Our current moulds are able to produce anodes of the following dimensions:

Length = 3000mm maximum
Width = 330mm maximum
Height = 330mm maximum

For anode sizes outside of these dimensions, new moulds can be made.

ANODE INSERT SELECTION

AMAC Cast onto a variety of insert types, depending on the method of attachment required.

This illustration on the right identified the most common insert types.

All steel is inspected prior to casting. If required, abrasive
cleaning is conducted according to Australian or International standards.

The following table represents a small proportion of the large block anodes we are able to manufacture.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)*	NOMINAL GROSS WEIGHT (KG)*
	AW12C 250x180x190	250	180	190	24.0	28.5
	AW12C 330x125x110	330	125	110	12.7	13.7
	AW12C 700x165x160	700	165	160	44.0	49.3
	AW12C 760x160x145	760	160	145	47.9	50.5
	AW12C 1000x50x50	1000	50	50	6.5	8.5
	AW12C 1000x100x100	1000	100	100	27.9	31.3
	AW12C 1200x65x65	1200	65	65	14.0	15.2
	AW12C 1200x100x100	1200	100	100	33.8	35.0
	AW12C 1200x165x160	1200	165	160	81.0	86.0
	AW12C 1220x75x75	1220	75	75	19.2	20.4
	AW12C 1500x50x50	1500	50	50	10.3	11.0
	AW12C 1500x65x65	1500	65	65	17.3	18.8
	AW12C 1500x75x75	1500	75	75	23.0	24.9
	AW12C 1500x95x130	1500	95	130	48.7	53.7
	AW12C 1500x100x100	1500	100	100	42.0	45.1
	AW12C 1500x165x160	1500	165	160	100.0	108.5
	AW12C 1500x280x260	1500	280	260	310.0	324.0
	AW12C 1800x175x220	1800	175	220	195.0	207.0
	AW12C 2400x165x160	2400	165	160	154.0	181.3
	AW12C 2400x170x215	2400	170	215	200.0	225.0

* Anode Weights may vary according to insert type

ALUMINIUM BRACELET ANODES

Applications: Marine and Subterranean pipelines and pylons.

Manufacturing bracelet anodes for over 25 years allows us to meet almost any design requirements. The bracelet anodes below are the most common. Any combination of these elements, as well as anode length, thickness and weight can be incorporated to meet particular project requirements. If a project requires a uniquely designed bracelet anode, please contact our office.

AMAC has a strict set of quality control mechanisms designed to ensure that each anode will function at its optimum for its entire design life. These controls ensure that steel grades and welding processes meet Australian and International Standards, alloy composition is accurate, insert fabrication meets dimensional specification, coating of internal surfaces and steel work is correct and all anodes meet weight and dimensional requirements.

ANODE SHAPE SECTION A-A	ANODE SHAPE SIDE VIEW	ANODE DESCRIPTION
		FOUR SEGMENT BRACELET ANODE - External pipe clamp - Mild steel flat bar inserts with rod supports - Anode half bracelet pipe clamp tabs welded at site
		TWO SEGMENT BRACELET ANODE - Internal pipe clamp - Mild steel flat bar inserts with rod supports - Anode half bracelet pipe clamp tabs welded at site
		TWO SEGMENT TAPERED BRACELET ANODE - Internal pipe clamp - Mild steel flat bar inserts with rod supports - Anode half bracelet pipe clamp, bolted together at site. Bolts designed so that half bracelets hinge around the pipe.
		FOUR SEGMENT BLOCK ANODES ATTACHED TO BRACELET - Four standard block anodes, welded to external clamp - Mild steel flat bar inserts and clamp - Anode half bracelet pipe clamp tabs bolted at site
		TWO SEGMENT BRACELET ANODE - External pipe clamp - Mild steel flat bar inserts with rod supports - Anode half bracelet pipe clamp tabs bolted at site

SPECIAL PURPOSE ANODES

AMAC has been manufacturing sacrificial anodes for over 25 years, over that time we have produced thousands of unique anodes for special purpose applications. We have the facilities to create any shape or size.

aluminium-cone-anodes Aluminium-Vortoil-Anode aluminium-curved-anodes