Magnesium Sacrificial Anodes

(for chemical composition of alloys - click here) If there is no menu on the left, click here

MAGNESIUM TEARDROP ANODES
Applications: Freshwater vessels.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	INSERT DIMENSIONS (MM)
	MA8C2	220	75	40	0.6	0.8	320x25x3 MS

Top of Page

MAGNESIUM CONDENSER ANODES
Applications: Condensers.

ANODE SHAPE	PRODUCT CODE	ANODE DIAMETER (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	INSERT DIMENSIONS (MM)
	MA2B0	50	50	0.20	0.25	16mm dia NB Pipe
	MA2B1	75	30	0.20	0.25	16mm dia NB Pipe
	MA2B250	110	55	0.90	1.00	16mm dia NB Pipe
	MA2B265	110	65	1.00	1.10	16mm dia NB Pipe
	MA2B4	195	90	5.30	5.60	16mm dia NB Pipe

Top of Page

MAGNESIUM ROD ANODES
Applications: Hot water service
Rods can be cut to length with a stainless steel, black steel or brass threaded cap attached.
Rods available in any length up to 3 meters.

ANODE SHAPE	PRODUCT CODE	ANODE DIAMETER (MM)	ANODE LENGTH (MM)	NOMINAL WEIGHT PER METER (KG)
	MA 19 dia rod	19	3000 max.	0.55
	MA 21 dia rod	21	3000 max.	0.68
	MA 24 dia rod	24	3000 max.	0.90
	MA 27 dia rod	27	3000 max.	1.10
	MA 33 dia rod	33	3000 max.	1.60
	MA 38 dia rod	38	3000 max.	2.25

Top of Page

MAGNESIUM RIBBON ANODE
Application: Below ground and freshwater infrastructure protection.
Available in any length required.

ANODE SHAPE	PRODUCT CODE	CROSS SECTION (MM)	NOMINAL WEIGHT PER METER (KG)	CORE WIRE DIAMETER (MM)	STANDARD COIL LENGTH (M)
	MA Ribbon 19x9	19 x 9	0.36	3.2	300

Top of Page

MAGNESIUM PACKAGED ANODES
Application: Below ground infrastructure.
All packaged anodes are supplied with insulated cable attached. Backfill is a combination of Gypsum and Bentonite in a calico / cotton bag.
Note: Anodes are also available as unpackaged or cabled only.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	NOMINAL PACKED WEIGHT (KG)	INSERT DIMENSIONS (MM)
	MA51C	420	85	85	5.80	6.20	13.20	470x12dia MS
	MA52C	410	100	100	7.70	8.10	20.00	460x12dia MS
	MA53C	550	110	100	10.00	10.50	24.00	600x12dia MS
	MA56C	650	135	135	20.00	20.70	31.00	700x12dia MS
	MA12C 1500x50x50	1500	50	50	7.00	8.40	53.00	1550x12dia MS
	MA12C 1500x65x65	1500	65	65	11.00	13.60	56.00	1550x12dia MS

Top of Page

SMALL MAGNESIUM BLOCK ANODES
Applications: Multi purpose for freshwater.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	DISTANCE BETWEEN HOLE CENTRES (MM)	NOMINAL NETT WEIGHT (KG)	NOMINAL GROSS WEIGHT (KG)	INSERT DIMENSIONS (MM)
	MA6C	150	70	35	-	0.70	1.00	250x25x6 MS
..	MA9C1	300	150	30	-	2.00	2.90	440x40x6 MS
	MA9C2	300	150	50	-	3.00	3.90	440x40x6 MS
	MA9C3	350	150	35	-	2.50	3.40	500x40x6 MS
	MA23B2	200	100	30	110	1.10	1.20	170x40x6 MS Also avail. with rubber gasket
	MA25B	300	100	50	160	2.10	2.60	260x40x6 MS Also avail. with rubber gasket
	MA28B1	300	150	30	155	1.90	2.00	240x40x3 MS Also avail. with rubber gasket

Top of Page

LARGE BLOCK ANODES
Applications: Large scale industry or infrastructure protection in fresh water.

AMAC have hundreds of large block anode moulds capable of producing a wide range of sizes. Our current moulds are able to produce anodes of the following dimensions:

Length = 3000mm maximum
Width = 330mm maximum
Height = 330mm maximum

For anode sizes outside of these dimensions, new moulds can be made.

ANODE INSERT SELECTION
AMAC Cast onto a variety of insert types, depending on the
method of attachment required.

This illustration on the right identified the most common insert types.

All steel is inspected prior to casting. If required, abrasive
cleaning is conducted according to Australian or International standards.

The following table represents a small proportion of the large block anodes we are able to manufacture.

ANODE SHAPE	PRODUCT CODE	ANODE LENGTH (MM)	ANODE WIDTH (MM)	ANODE HEIGHT (MM)	NOMINAL NETT WEIGHT (KG)*	NOMINAL GROSS WEIGHT (KG)*
	MA12C 550x125x125	550	125	125	14.0	14.5
	MA12C 600x90x90	600	90	90	9.0	10.0
	MA12C 770x50x50	770	50	50	3.6	3.8
	MA12C 1000x50x50	1000	50	50	4.5	5.5
	MA12C 1500x50x50	1500	50	50	7.0	8.4
	MA12C 1500x65x65	1500	65	65	11.0	13.6
	MA12C 1500x100x100	1500	100	100	28.7	31.8
	MA12C 1500x150x150	1500	150	150	64.0	66.0

* Anode Weights may vary according to insert type
Top of Page

SPECIAL PURPOSE ANODES
AMAC has been manufacturing sacrificial
anodes for over 25 years, over that time
we have produced thousands of unique
anodes for special purpose applications.
We have the facilities to create any
shape or size.

Top of Page